Sort By
Per Page
View
Grid
List
Veritas Dovetail Markers
For quick, accurate marking of dovetails, this pair of Veritas Dovetail Markers are the best available. With riding ledges on both sides, these 50 x 50mm markers can be flipped over to scribe both slopes of the dovetail.
They are designed so the entire ledge is riding on the reference face, even when marking edge dovetails.
The relieved corners at the join of the body ensure perfect seating....
Veritas Edge-Trimming Planes
Edge-trimming planes are used for final trimming cuts on jointed boards to ensure smooth edges at exactly 90° to the face, and for working end grain. In many instances you will need only one model; the appropriate choice is often based on which of your hands is dominant.
However, neither model is exclusively for left or right handed users, as the planes are in fact complementary. Having both...
Veritas Flat Spokeshave PM-V11
The Veritas flat spokeshave has a 1/8" (0.125") thick PM-V11 tool steel blade, seated at 45° to the sole.
The thick blade, carefully machined lever cap and blade bed all combine to produce chatterfree cutting in most situations.
The ductile cast iron body is fitted with African rosewood handles that are shaped for comfort and control, offering several ways to grip the tool comfortably...
Veritas Flushing Chisels
Veritas designed this flushing chisel based on a set of antique patternmakers’ chisels from their collection. More than just for flush trimming inlay or joinery, a flushing chisel allows you to work into corners and extend flat surfaces right up to adjacent surfaces where a plane blade cannot reach. One hand pushes the tool while your other hand guides the blade along the workpiece, giving you...
Veritas Jack Rebate Plane + PM-V11 Blade
This Veritas Jack Rebate plane cuts large-scale rebating down to size. The body is 385mm long and the blade extends the full width (57mm) of the body. It is suitable for very large rebates and fielded or bevelled panels. The long sole and substantial mass help ensure accuracy.
The 4.8mm thick bevel-up blade makes right or left-handed corner cuts cleanly and accurately. Adjustable scoring spurs...
Veritas Large Journeyman's Mallet
The Veritas Large Journeyman's Mallet has a solid brass head, a walnut handle and a simple, refined profile, making it an elegant and effective mallet.
Designed for work that requires more finesse than power, it can be held by the handle or used with the head cradled in your palm, allowing you to more precisely control the force of blows. The head is attached to the handle with a blind threaded...
Veritas Medium Router Plane
Slightly larger than the Veritas small router plane, this tool has the advantage of using the same blades as our full-size router plane.
For general use, the blade may be positioned inboard with the sole encircling it for maximum registration on the workpiece, even when approaching from the side or working an edge. This allows it to bridge recesses, providing great stability even on narrow stock....
Veritas Miniature Bench Plane
This 1/3 scale version of the Veritas small bevel-up smooth plane is only 3½" long and 13/16" wide.
Fully functional, it has a 5/8" wide A2 blade (0.06" thick) with a 25° bevel angle that, together with the 13° bed angle, provides an effective cutting angle of 38°. The stainless-steel Norris-style adjuster lets you set the blade with precision.
The body is made from investment-cast stainless...
Veritas Miniature Marking Gauges
These are fully working versions of the Veritas wheel marking and dual marking gauges, but only one third of the size. Their smaller scale allows greater control and makes these exquisite tools perfect for small marking tasks that require a delicate touch. Each is 57mm long and weighs just over 14g and 21g respectively.
Like their full-size counterparts, they cut (not tear) fibres for clear marks...
Veritas Narrow Router Plane Blades
These high-carbon steel router plane blades fit the Veritas large and merdium router planes, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in both metric and imperial sizes.
Please note that Veritas do not produce a 3mm and a 1/8" blade, they consider them close enough in size so we only advertise the 1/8".
Sizes...
Veritas PM-V11 Bench Chisels
Precision made in Veritas' own machine shop, these bench chisels are milled from PM-V11 steel (Rc61-63), an innovative proprietary alloy. This metal's micro-structure makes it extremely durable, so it can withstand the impact of heavy chopping cuts without chipping or deforming as readily as other tool steels, even at bevel angles as low as 20°. Highly wear resistant, the edge typically...
Veritas Power Tenon Cutters
Veritas Power Tenon Cutters
As recommended to us by Jon Warnes
Jon Warnes has taught rustic woodcraft for many years, so his recommendation is one we trust. These Veritas Power Tenon Cutters are a firm favourite of his — and for good reason.
Designed specifically for making strong, round tenons with a smooth shoulder, these tools are ideal for rustic furniture but work just as well with...
Veritas Rip Cut Carcass Saw
The saw has a 275mm (11") long by 0.5mm thick high-carbon steel blade filed for rip cutting at 12tpi. The teeth have a rake angle of 10°, an included angle of 60° for fast and accurate cutting along the line of the grain. The depth of cut is 60mm.
The back of this saw is injection moulded under high pressure onto the blade and stainless-steel handle-mounting bolt. This forms a solid one-piece...
Veritas Set of 3 Miniature Chisels
This chisel set is the latest addition to the Veritas line of fully functional miniature tools. Made at about 1/3 the scale of our regular bench chisels, each is only about 3-1/4" long overall and weighs less than a third of an ounce. At this scale, the three tools in the set have 3/8", 1/4" and 1/8" wide blades. All permit a delicate touch where fine, controlled cuts are needed.
Their...
Veritas Skew Block Plane + PM-V11 Blade
The Veritas Skew Block Plane is a versatile plane that excels at trimming rebates and planing end grain. Of course, you can also use it as a normal block plane. Its Norris-style adjuster guarantees precise blade setting. Machined and surface ground, the 162 x 44mm body is ductile cast iron. It has a 12° bed angle and a movable toe fully enclosed by the body casting. A Bubinga knob locks the toe...
Veritas Skew Rabbet + PM-V11 Blade
Like the Stanley #289 that inspired it, it is configured with a blade skewed at a 30° angle to reduce cut resistance, aid in shaving clearance, and help pull the fence tight against the workpiece. Because the blade sits flush with the side of the plane body, corner cuts are clean and accurate.
Adjustable in two axes (vertical and horizontal) for depth and projection, the scoring spur sits...
Veritas Small Journeyman's Mallet
The Veritas Small Journeyman's Mallet has a solid brass head, a walnut handle and a simple, refined profile, making it an elegant and effective mallet.
Designed for work that requires more finesse than power, it can be held by the handle or used with the head cradled in your palm, allowing you to more precisely control the force of blows. The head is attached to the handle with a blind threaded...
Veritas Small Plough Plane
This is Veritas' redesigned small plough plane. While it still excels at cutting grooves, rabbets and tongues, it now has the ability to cut decorative beading (beading blades available soon).
Closest in size to the classic Record #044 plane, the preferred size of the old-style plough planes, it has a 6 5/8'' long fence that registers solidly to the workpiece and is through-drilled...
Veritas Small Router Plane
The Veritas Small Router Plane is a versatile tool for fine work, particularly on narrow material or in confined areas, this small router plane is invaluable for any task requiring small recesses, grooves or dadoes.
The sole is designed to completely encircle the blade when in the closed-throat position for maximum registration to the workpiece, even when approaching from the side or working...
Veritas Square Fence
A carpenter's square is frequently needed just because of its size. The key disadvantage of such a square (its lack of a supporting fence ledge) can now be eliminated using a Veritas square fence.
The 8" (200mm) long anodized aluminum extrusion can be readily attached to either the stock or blade of your square (depending upon intended use) with the two integral brass screws. The face of...
Veritas Tabling Scribe
No matter how careful you are with layout and assembly, a legged project will almost always be wobbly. One way to ensure the project will sit properly without rocking is by tabling it; that is, placing the project on a fl at table (e.g., the top of a table saw), marking a consistent trimming line on each leg, and then cutting to this line. The Veritas Tabling Scribe simplifies this step, providing...
Veritas Template Groove Cutter, Inlay Chisel and Pin Awl
With slender handles for pencil-like control, these Veritas tools are useful for freehand inlay work and following templates. They are also good complements to the Veritas inlay groove and slicing tool since the groove and chisel tools can be used to clean up, deepen or terminate grooves without widening them.
The Veritas template groove cutter is available in 0.025", 0.032" and 0.040"...
Veritas Wide Router Plane Blades
These high-carbon steel router plane blades will fit the Veritas large and medium router planes, and the the Veritas hinge mortise plane, as well as Stanley #71 router planes (with the height-adjustment nut inverted). The narrow single-piece blades are available in five Imperial sizes
The 1/2" blades have a two-piece design and are available in two styles: straight and spear-point (for final...
Veritas Wile Plane Hammer
Making fine adjustments to plane-blade position is easier with the right tool, and few can compare to the finely made plane hammers of Richard Wile, a hobbyist woodworker from Nova Scotia.
Based on Wile's design, this hammer is machined in our shop to have the same elegant proportions as the original, giving it a weight and balance that feel right in the hand. The small brass head, only 5/8"...
Welsh Stick Chairs
By John Brown
Welsh Stick Chairs is a small but mighty book. At 104 pages long, this book can be read in an afternoon, but it has changed the lives of thousands of woodworkers all over the globe.
John Brown (1933-2008) was a chairmaker in Wales who specialized in Welsh stick chairs, a vernacular form of furniture that was typically made by the end users. Compared to Windsor chairs, Welsh stick...
Wild Mango
Wild Mango is a stunning deep cream coloured wood with golden undertones. For furniture, flooring, turning and carving.
With The Grain
By Christian Becksvoort
July 2023 - Note the change in cover colour.
A little knowledge about trees goes a long way toward improving your woodworking.
You don’t need a degree in dendrology to build a desk. But you do need intimate knowledge of how our raw material grows and – more importantly – how it responds to its environment after it has been cut and dried.
This knowledge...
Woodcarving: Tools, Materials & Equipment
By Chris Pye
Woodcarving, Tools, Materials & Equipment is jam-packed with information about the craft of woodcarving. This well-illustrated guide by master carver Chris Pye covers all you need to know about the tools of the trade.
Covering a wide array of carving challenges such as proper clamping technique to the strengths and limitations of tools, expert Chris Pye offers a wealth of information...
