Sort By
Per Page
View
Grid
List
Peacock Oil (Low Odour) - Regal Red - 100ml
Skelton Saws Peacock Oil is a wood finish made up of a mixture of traditional oils, resins and waxes, each adding its own special benefit. All ingredients are naturally obtained, mainly from ancient tree species and all have been time proven wood preservatives used by the Egyptians and Ancient Greeks. Both breathable and water-repellent, unlike current commercial finishes, Peacock Oil is built up from...
Saburrtooth 1/4'' Sphere - 5/8'' x 5/8''
Head Diameter: 5/8"
Head Length: 5/8"
Saburrtooth Round Faced Shaping Wheel - 4'' Donut Wheel with Holes
15% discount from price shown.
Tormek Knife Angle Setter
Why KS-123 Knife Angle Setter?
Set the exact sharpening angle for any type of knife.
Easy to use - set the angle in three easy steps.
Sets an exact sharpening angle even for tapered blades.
Self-adjusting for the diameter of the grinding wheel.
Compatible with all Tormek knife jigs.
Works with the Tormek T-8, Tormek T-4 and older models.
What's Your Angle?
Our angle is always...
Auriou Traditional Stonecarving Chisels with Pointed Teeth
The Auriou Traditional Stonecarving Chisels with Pointed Teeth are expertly crafted tools designed for refining and smoothing stone surfaces after rough shaping with a point chisel. These chisels are particularly effective for working with soft stone and marble, allowing you to efficiently remove material and achieve detailed, precise results.
Key Features:
Refinement Tool: Ideal for smoothing...
Hamlet Big / Little Brother Cutter
1x replacement cutter that fits the Hamlet Big and Little Brother Hollowing Tool.
Pfeil Chip Carving Knife - Kerb 3
Pfeil Chip Carving Knives come in a variety of shapes, this one is a Kerb 3 also known as Konturenmesser.
A knife to carve contours on flat surfaces. Can also be used for chip carving, it has a smaller blade than the Kerb pfeil, which makes it even easier to use it to draw fine contours in wood, similar to a pencil.
Fine cherry wood handles, shaped to correspond to the use of the knife.
Blade...
Pink Ivory
Pink Ivory is a beautiful timber which turns like hard soap. Predominantly pink with fine streaks of pinky red which will darken with age.
Veritas Side Rebate Plane
The Veritas Side Rebate Plane is used for cleaning up or trimming sidewalls of rebates, dadoes or grooves to yield a perfect fit with its mate. It has a practical dual-blade configuration, coupled with an ingenious pivoting handle that permits right- or left-hand use to accommodate grain direction.
The thin sole functions much like a skate, allowing use in slots as narrow as 3/16" and to...
Veritas Concave Spokeshave PM-V11
The Veritas Concave spokeshaves have a extremely durable PM-V11 steel alloy blade, seated at 45° to the sole. The thick blade, carefully machined lever cap and blade bed all combine to produce chatterfree cutting in virtually all conditions.
This spokeshave is popular with chair and paddle makers, being the first choice for a wide range of jobs from small spindles to large oars.
The ductile...
Benchcrafted Crisscross Retro
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
Robin Wood - Woodland Axe
Introducing the Wood Tools ‘Bushcraft Axe’ with an extra comfy handle.
Their woodland axe is the perfect all round axe. Use it for everything from splitting your firewood to warm your home, to felling trees and coppice work. You can even carve a spoon with it.
Take it with you on your adventures – it is the perfect size for carrying with you. Light enough to carry, heavy enough...
Veritas Quick-Release Wonder Dog
This version of the Wonder Dog has a fast-acting cam mechanism to speed up adjustments. You just slide the head against the workpiece, then throw the lever to apply clamping force. Curved and irregular shapes can also be clamped; two screw holes in the brass dog head let you attach a custom face of any shape, giving good control without marring work.
The low-profile head and clamp body are 5/8"...
Auriou Curving (Chairmakers) Rasp
Called a curving rasp but also known as a chair makers rasp due to its usefulness for shaping the crest rail or seat of a chair or working any large concave surface. Michel Auriou also comments that this rasp is effective when working along the grain and is very useful in shaping cabriole legs.
250mm (10") overall with coarse grain 7 teeth for rapid stock removal.
One end is a tapered half-round...
Gransfors Bruk Hunter's Axe 418
The Gransfors Bruk Hunter's Axe is specially made for hunters. The Poll is forged thinner than normal and gently rounded and burnished to a Flay Poll to be used when skinning an animal. It is also good for chopping wood as well as meat and bones.
The grip of the handle has circular grooves which gives a steady grip even if your hands are wet or sticky. This axe has received, as the first and only...
Veritas Fluting Blades for Combination Planes
For use with the combination plane, these blades are used to create decorative concave fluting on workpieces. The PM-V11 steel blades are available in 3/16", 1/4", 3/8" and 1/2" flute diameters. Made in Canada.
Mortise & Tenon Magazine - Issue 8
Table of Contents:
“A Sense of Place” Amy Umbel
“Intermediate Technology in the Shop” Harry Bryan
Examination: Grain-Painted Chest Over Drawers
“Crafting an Education: Recreating Henry David Thoreau’s Desk with Eleventh Graders” – Cameron Turner
“The Legend of the Jimmy Possum Chair” – Mike Epworth
“Subversive...
Working with Living Willow
By Jon Warnes,
This booklet giving basic information on how to make living willow structures for gardens and public places.
The Workshop Book
By Scott Landis; foreword by Roy Underhill
First published in 1991, "The Workshop Book" by Scott Landis remains the most complete book about every woodworker's favourite place: the workshop.
“The Workshop Book” is a richly illustrated guided tour of some of the world’s most inspiring workshops — from garage to basement shops, from mobile to purpose-built...
Lie-Nielsen No.3 Iron Smoothing Plane
Lie-Nielsen's smoothing planes are precision machined from an iron casting. Comes with a beautifully formed handle and knob made from American cherry. They have the Stanley Bedrock style frog which gives a fully machined mating fit between the frog and body. You can move the frog backwards or forwards, allowing the opening or closing of the plane's mouth without having to remove the lever cap...
Peacock Oil (Low Odour) - Regal Red - 250ml
Skelton Saws Peacock Oil is a wood finish made up of a mixture of traditional oils, resins and waxes, each adding its own special benefit. All ingredients are naturally obtained, mainly from ancient tree species and all have been time proven wood preservatives used by the Egyptians and Ancient Greeks. Both breathable and water-repellent, unlike current commercial finishes, Peacock Oil is built up from...
Robert Sorby Sizing Tool
The Robert Sorby Sizing Tool is used in conjuction with a parting tool to obtain accurate and consistent diameters up to 3" on spindlework. It fits either the Robert Sorby 3/8" beading and parting tool or bedan.
The two thumb screws lock the sizing tool firmly in place.
How to use:
Set the parting tool to the desired size with a steel rule – lock tool in position by tightening...
Thomas Flinn Pax Veneer Saw 15tpi
The Pax Veneer Saw is made to enable cuts to be started in the centre of a panel of wood and for other inlaying work.
The saw has 15tpi and the two different sides of the blade are made so that one side has a crosscut tooth formation and the other side has a rip tooth formation.
The saw has a Walnut handle and are individually blister packed. Blade length 3".
Veritas Miniature Work Surface
The Veritas 11'' × 8'' miniature Worksurface is made from 18mm Baltic birch plywood and features an array of 17/64'' diameter dog holes, spaced 1 1/2'' apart.
It can be used in combination with the four miniature workbench accessories (Wonder Dog, hold-down, surface dogs and planing stops).
Four rubber feet help prevent the platform from shifting in use.
Made...
Veritas Ruler Stop
The Veritas ruler stop increases the usefulness of a metal ruler by providing a solid reference point. It is ideal for setting saw fences, repeat cuts, etc.
To use, slide the stop over the ruler end and tighten it at the desired position. The notched post at the tip of the brass adjustment screw allows even the thinnest rulers to be clamped securely; it will not mar the ruler edge. Repositioning...
Hamlet Detail Gouge
Detail gouge for very fine point work between spindles.
Kutzall 1/4'' Sphere Burr - 1''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Knew Concepts Birdcage Titanium Fret Saw with Lever Tension
The Knew Concepts Birdcage Titanium Fret Saw is the strongest, most rigid Fret Saw available on the market today! Its spine is a welded titanium beam, the blade is tensioned with a Lever that can tension blades so tight they "ping" with notes never heard before, makes turns that are tighter than ever before, and the blade clamps lock at 45° left, 0°, 45° right.
Saws come with...
Kutzall 1/8'' Rotor Saw Burr - 3/4'' x 1/8''
Kutzall burrs are the perfect companions for your rotary carving tools.Made in the USA, Kutzall burrs provide a great combination of material removal and surface quality. Efficient with or against the grain, these burrs have a long wear life.Their outstanding performance on a wide variety of materials to include wood, plastic, rubber, fibreglass and soft stone.NOTE: These burrs should only be used...
Toothed Blade for Lie-Nielsen No. 62 Low Angle Jack Plane
Toothed Replacement blade for the Lie-Nielsen No. 62 Low Angle Jack Plane.
Toothed blades have small chisel-like teeth .030" (.762mm) wide, and spaced .030" apart. They are used for heavy stock removal in difficult grain. Follow with a fine-set Smoothing Plane.
The blade comes with a 25° flat ground bevel; it sits in the tool at 12°, making the included cutting angle 37°.
The blade comes...
Quercus Magazine - May/June 2022
QM12 May/June 2022
The May issue of Quercus features an extract from Christopher Schwarz’s significant book on the making of Stick Chairs. The article will focus on the choosing of timber for chairmaking, written by one of the most well-known and influential of woodworkers worldwide.
There will be more about router planes, featuring the making Paul Sellers’ toolmaking kits. Quercus...
The Warrington Chest
This amazing chest was made by a Sheffield pattern maker, Ernest Warrington, when he was just 18 years old. The book traces Ernest’s family history, explains the trade of pattern making and its context in Sheffield, and tells the story of how the chest passed down the family.
The chest still contains a good proportion of the kit of tools used by its pattern maker owners and these tools are...
Mortise & Tenon Magazine - Issue 6
Table of Contents:
The Good Life: Discussing Slöjd with Jögge Sundqvist
Cutting-edge Technology: Rediscovering the Double-iron Plane - Steve Voigt
A Chair Called Henry - Nathaniel Brewster
William Morris and George Nakashima: Finding the Middle Landscape - David Lane
Examination: 1804 Painted Cupboard
A Tale of Two Trees: The Radical Efficiency of Green Woodworking - Michael...
5 1/2'' Post for Veritas Bench Hold Down
This 5 1/2" Post is for the Veritas Bench Hold Down, for holes where through travel is limited.
At just 5-1/2" long, it provides about 4" of clamping capacity.
Patented.
Mechanick Exercises
Joseph Moxon’s “Mechanick Exercises or the Doctrine of Handy-Works,” is the first English-language book on woodworking (and other trades) – but it was written by a man who wasn’t a woodworker. Instead, Moxon (1627-1691) was a printer, a maker of mathematical instruments and (for a time) hydrographer to King Charles II.
Oh, and the engravings of woodworking tools in...
Tormek Anti-Corrosion Concentrate (2 Pack)
The Tormek Anti-Corrosion Concentrate makes water non-corrosive. Always use with Tormek diamond wheels. It can also be used with grindstones.
Add 10ml concentrate to 250ml water (~4%). Scale for correct dilution. Mix Anti-Corrosion Concentrate and water before adding to water trough. If you want to save the mix overnight, remember to lower the water trough. Does not contain anti-freeze.
Each...
Henry Taylor Hand Adze Straight Blade
Sheffield made hand forged adzes by Henry Taylor for single handed use.
There is a choice of 3 adzes, this one a 50mm (2") straight edge (like a chisel) or curved end (like a gouge) with either a shallow/mid gouge or a tight gouge (sweep 9).
At the other end to the cutting edge is a square faced hammer poll.
All the adzes have an ash handle of 250mm (about 10") .
The overall head size...
Lie-Nielsen Leather Saw Cases
Protect your Backsaw with this fitted Michigan Leather case. Use it for storage and transportation. Beautifully made in Maine.
Pfeil Curved Adze
The Pfeil Curved Adze, forged from quality steel, is available in Standard and Small:
Standard: Length 460mm (18”), cutting edge 95mm (3¾"), weight 1100g.
Small: Length 280mm (11”), cutting edge 50mm (2”), weight 600g.
Please be aware that these do not come pre-sharpened.
Saburrtooth 1/4'' Taper - 1/4'' x 1 3/8''
Head Diameter: 1/4"
Head Length: 1-3/8"
Shinwa Protractor No.19 Chrome Finish
Measures 0 - 180° with a reverse scale.
150mm stainless steel blade with a hard chrome coating for easy reading (and a 100mm scale).
90mm wide body.
The Decorating Elf
The Decorating Elf is the most versatile texturing tool available and so simple to use.
Designed by William Hudson (USA), known to his friends as the "Turning Elf". Ideal for decorating pens, boxes, finials, bowls, jewellery, Christmas decorations, toys, key rings, pepper & salt mills and lots, lots more.
Cuts wood - side and end grain, acrylics, alternative ivory, bone and antler.
Use...
Pfeil Medium Sized Tools - Series 2
Pfeil Medium Sized Tools are for smaller hands and beginners tackling basic projects. They have exactly the same quality and features as the Pfeil full sized tools.
These are the Pfeil Medium Sized Gouges.
Sweep ranges from series 2 to series 11. The higher the series, the deeper the sweep.
Widths range from 1mm to 14mm.
Veritas Mortice Chisel Adapter for Veritas Mk.II Narrow-Blade Honing Guide
This Veritas Mortice Chisel Adapter for the Mk.II honing guide expands its blade-holding capacity to allow consistent, accurate honing of mortice chisels. It increases the space between the roller base and the blade carrier to accommodate the thicker blades of mortice chisels, holding blades up to 11/16" thick.
Compatible with the narrow-blade clamping heads, the adapter is configured so...
Connells Small Chisel Guard Set 1
Set contains the following leather chisel guards: 2 x 2", 2 x 1¼", 2 x 1", 2 x ¾", 6 x ½''
Benchcrafted Crisscross 14
The Benchcrafted Crisscross completely transforms any leg vice into an effortless experience. Fully supporting the weight of the chop, the vice hardware, and its own weight, the Crisscross floats in and out on steel pins and bearing plates, giving a virtually weightless, friction-free action to the vice. The mechanism automatically adjusts through the range of your vice's capacity to any workpiece...
.png "Last Ones!")
![Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]](/images/products/thumbs/3725_9200.jpg "Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]")
![Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]](/images/products/thumbs/3725_9201.jpg "Woodpeckers - 2616SS Square - 600mm [Preowned, Unused, SOLD]")
